802.11ac Wave 2 Access Point with Dedicated Security Radio 5 Pack
Scalable Enterprise Wi-Fi Management
The UniFi® Ecosystem enables the system integrator to effectively and efficiently create wireless network designs of any size, from small to large, with the potential for unlimited scalability. The built-in, dedicated security and monitoring radios of the UniFi SHD (Secure High Density) AP provides visibility into site performance, channel planning, and local interferers, allowing the integrator to properly evaluate performance and quickly respond to changing interference and security threat landscapes. Easily accessible through any standard web browser and the UniFi app (iOS or Android™), the UniFi Controller software is a powerful software engine ideal for highdensity client deployments requiring low latency and high uptime performance.
The UniFi SHD AP features the latest in Wi-Fi 802.11ac Wave 2 MU‑MIMO technology combined with dedicated security and Bluetooth radios.
Intuitive UniFi Controller Software
The system integrator can leverage the controller to easily configure and administer an enterprise Wi-Fi network.
The system integrator can start with one (or upgrade to a multi‑pack) and expand to thousands while maintaining a single unified management system.
Save Money and Save Time
UniFi comes bundled with a software controller that can be deployed on an on-site PC, Mac, or Linux machine; in a private cloud; or using a public cloud service.
Initial 802.11ac Wave 1 SU-MIMO (Single-User, Multiple Input, Multiple Output) technology allows an earlier‑generation AP, such as the UniFi AC Pro AP, to communicate with only one client at a time.
802.11ac Wave 2 MU‑MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP, such as the UniFi SHD AP, to communicate with multiple clients at the same time – significantly increasing multi‑user throughput and overall user experience. The following describes a 5-client scenario:
Assuming the same conditions, a Wave 2 AP provides up to 75% improvement1 overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level. 4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
- four 1x1 clients
- two 2x2 clients
- one 2x2 client and two 1x1 clients
- one 3x3 client and one 1x1 client
A 4x4 Wave 2 AP delivers up to 33% greater performance1 than a Wave 1 AP that is 3x3 in both radio bands.
The UniFi SHD AP is the first UniFi 802.11ac Wave 2 AP with a dedicated security radio. Combining the performance increases from MU‑MIMO technology and the use of 4x4 spatial streams, the UniFi SHD AP delivers up to 125% greater performance1 than a typical Wave 1 AP.
For optimal performance, use MU‑MIMO clients. SU‑MIMO clients will also benefit and gain up to 10‑20% greater performance when used with the UniFi SHD AP.
1 Actual performance values may vary depending on environmental and installation conditions.
- Simultaneous Dual-Band 4x4 Multi-User MIMO
- Four-Stream 802.11AC Wave 2 Technology
- 5 GHz Band with Radio Rate of up to 1.7 Gbps
- Dedicated Security Radio with Persistent Threat Management
- 2.4 GHz Band with Radio Rate of 800 Mbps
- 802.3at PoE+ Compatible
- (2) Gigabit Ethernet Ports
* 5 packs do not come with PoE injectors.
Unifi Wave 2 Dual Band AP
- 5 x UniFi AP AC SHD
- 5 x Mounting Plate
- 5 x Ceiling Backing Plate
- 20 x Ceiling Screws
- 20 x Keps Nuts
- 10 x T-Bar Mounts
- 10 x T-Bar Screws
- 1 x Allen Wrench
- 20 x Wall Screws
- 20 x Screw Anchors
- 5 x Cable Feed Plug
- 1 x Quick Start Guide
* PoE Adapter NOT Included in 5 Packs
Unifi Wave 2 Dual Band AP - Specifications
|Dimensions||∅220, Height:48.1 mm|
With Mounting Hardware
Without Mounting Hardware
|Enclosure Characteristics||Outdoor UV Stabilized Plastic|
|Processor Specs||dual-core SMP Krait CPU at 1.4 GHz|
|Memory Information||4Gbits DD3|
|Management Interface||Ethernet or WiFi|
|Networking Interface||(2) 10/100/1000 Ethernet|
|Ports||(2) Ethernet RJ45, (1) USB Type C|
|Max. Power Consumption||20W|
|Supported Voltage Range||44VDC to 57VDC|
|ESD/EMP Protection||24KV +/- Air / Contact|
|Operating Temperature||-10C to 70C|
|Operating Humidity||5 to 95% Noncondensing|
|Buttons||QTY1 reset to factory defaults|
|Antennas||QTY 2 2.4G internal single band antennas, dual polarity
QTY2 5G internal single band antennas, dual polarity
|Antenna Gain||2.4G 3dBi
|Max. TX Power
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other MrWiFi users shop smarter by writing reviews for products you have purchased.