Cel-FI GO Mobile Repeater Kits for Cars, 4WD's & Trucks with Heavy Duty Spring Mount Omni Antenna

RPR-CF-OA-0020-T

$1,269.95
In Stock

Outdoor Antenna
Antenna Colour
Choose Carrier

 

Cel-Fi GO Vehicle Mobile Repeater has been tested, authorised and approved for use on theTelstra, Optus and Vodafone Mobile Network.

 

The Cel-Fi GO Mobile repeater for Vehicles, approved for use on Telstra, Optus or Vodafone mobile networks. and is a smart repeater to boost and distribute a 3G/4G mobile signal within your Vehicle including Cars, 4WD & Trucks. While it boosts the mobile signal it will support voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.

Provides Coverage For Automotive Applications

Simply install Cel-Fi GO inside your vehicle and enjoy having great 3G or 4G mobile reception. No longer will you need to stop or drive to a particular spot to be able to make and receive phone calls.Your Cel-Fi GO can be configured to improve the mobile coverage for all types of vehicles from cars to trucks, to farm machinery and caravans,all with only a change in antenna.

 

Increases Mobile Data Speeds

Slow internet speeds on your mobile device are often caused by low signal. If you suffer from low signal on the go, you will be able to relate to the frustration of trying to access email or the internet. Cel-Fi GO will amplify the available LTE or HSPA mobile signal and increase your data speeds dramatically. Email, internet, video and social networking speeds can achieve up to 4 x improvement. Note: The 4G/LTE bands can only be utilised for data (notcalls) unless both the smart phone and the local network support Voice over LTE(VoLTE).

Your Cel-Fi GO Mobile version can be configured to improve the mobile coverage for many types of applications from Cars4WD's to RV's or Motorhomes, Trucks, to small Marine Vessels.

Cel-Fi GO protects the mobile network in several ways by:

  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.
CEL-FI GO Mobile for Vehicles, Cars & 4WD's

 

Cel-Fi GO is covered by a 24 month warranty.

 

Important Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.

CEL-FI- GO Features:

  • A solution approved by Telstra, Optus and Vodafone meeting ACMA regulations
  • Amplifies and disburses a  3G /HSPA/4G (LTE) mobile signal,boosting one frequency band at a time.
  • Provides manual selection of 3G/4G or utilise the auto band selection.
  • Once installed,Cel-Fi GO has Automatic Gain Control (AGC) continuously monitoring system path loss to deliver maximum gain up to 70dB.
  • Provides a mobile coverage around the vehicle area.
  • Rigid cast-aluminium casing with IP54 rating, suitable for adverse environments.
  • Network-Safe protection that monitors mobile base stations in real time to ensure no interference with the normal function of the mobile network.
  • Cel-Fi GO supports Bluetooth Connectivity or Micro USB connection to Nextivity’s Smartphone or PC WAVE App
  • Intuitive WAVE App allows quick and easy installation by a trained technician.
  • Designed for automotive applications
  • Bluetooth WAVE App for iPhone, Android & Computers Click Here

NOTES:
Cel-Fi GO will provide coverage for 20+ active users depending on the mobile network capacity in your area.
The 4G/LTE bands can only be utilised for data if both the smart phone and the local network support VoLTE. You will need to check your smart phone to conörm it has VoLTE functionality.

Cel-Fi GO mobile version will not boost in areas where the signal is already very strong. If the signal is better than -80dBm (3G) or -95dBm (4G) the mobile GO version will cease to boost to ensure a degraded level of service is not experienced.

 

 

 

(RPR-CF-OA-VEHICLES)

Cel-Fi GO Mobile Repeater Kits for Cars, 4WD's & Trucks

Pack Includes:

  • Cel-Fi GO Mobile Model
  • Choice of Outdoor Vehicle Antennas as listed below. (choice of black or white)
    • Antenna Magnetic Fin Wideband (698-2700 MHz, 4-5.6 dBi)
    • Heavy Duty "G-BANGER" Spring Mounted Omni Antenna by Outback Antennas 73cm Wideband (98-2700 MHZ, 4 dBi) with 4.5m cable. (Black or White)
  • Adhesive Indoor Antenna "GUMMY" with 3m cable
  • 12v Cigarette Lighter DC Adapter with Earth and 5m Lead
  • Vehicle Antenna Mount Heavy Duty "HARD-ON" Outback Antennas
  • Bluetooth WAVE App for iPhone, Android & Computers Click Here

 

Cel-Fi GO Mobile Repeater Kits for Cars, 4WD's & Trucks -SPECIFICATIONS

 

Cel-Fi GO - Mobile Model

Details  
Manufacturer Nextivity
Output Power NA
Model Cel-Fi-Go Mobile
Antenna Port 2 x SMA Female
Frequency 3G 850MHz, 4G 700/1800MHz (boosts one band at a time)
Warranty 24 Months
Gain 100dB
   

 

INDOOR  ADHESIVE MOUNT ANTENNA "GUMMY" - 700-2700MHZ

ELECTRICAL SPECIFICATIONS
Frequency Range 698-960 MHz / 1710-2170 MHz
Input Impedance 50 Ω
Gain 3.5 dBi
VSWR ≤3.0
Polarisation Vertical
Radiation Direction 360° (omnidirectional)
Maximum Input Power 50 W
MECHANICAL SPECIFICATIONS
Antenna Length 115x21x3mm
Cable 300mm
Connector Type SMA Male
Mounting 3M Sticker
Radome Color Black
Cable RG174
Suction 07kg
Attachment Welding

 

HEAVY DUTY "G-BANGER" Spring Mounted Omni Antenna by Outback Antennas 698-2700MHZ - SPECIFICATIONS

NETWORK COMPATABILITY
Network Bandwidth Coverage Gain
Telstra 4GX 700 MHz Yes 4 dBi
Telstra Next-G 850 MHz Yes 4 dBi
Telstra 4G 1800 MHz Yes 6 dBi
Telstra 3G (Metro) 2100 MHz Yes 6 dBi
Telstra 4G (Metro) 2600 MHz No -
       
Optus 4G+ 700 MHz Yes 4 dBi
Optus 3G 900 MHz Yes 4 dBi
Optus 4G 1800 MHz Yes 6 dBi
Optus 3G (Metro) 2100 MHz Yes 6 dBi
Optus 4G TDD 2300 MHz No -
Optus 4G (Metro) 2600 MHz No -
       
Vodafone 4G+ 850 MHz Yes 4 dBi
Vodafone 3G 900 MHz Yes 4 dBi
Vodafone 4G 1800 MHz Yes 6 dBi
Vodafone 3G (Metro) 2100 MHz Yes 6 dBi
ELECTRICAL SPECIFICATIONS
Frequency Range 698-960 MHz / 1710-2700 MHz
Input Impedance 50 Ω
Peak Gain 4 / 6 dBi
VSWR ≤2.0:1 / ≤2.0:1
Polarisation Vertical, linear
Horizontal Beamwidth 360° (omnidirectional)
Vertical Beamwidth 48 / 23°
Maximum Input Power 50 W
MECHANICAL SPECIFICATIONS
Input Connector SMA Male
Cable 4 m LMR200 cable
Lightning Protection DC Ground
Antenna Construction Fibreglass radome, heavy duty spring base
Mounting L bracket for fender mounting
Dimensions 730 x Ø50 mm
Weight 1.5 kg
Rated Wind Velocity 210 km/h
Operating Temperature -40 to +65°C

SHIPPING SPECIFICATIONS

SKU RPR-CF-OA-VEHICLES
Model # RPR-CF-OA-VEHICLES
Brand CEL-FI
Shipping Weight 3.5000kg
Shipping Width 0.300m
Shipping Height 0.200m
Shipping Length 0.400m
Shipping Cubic 0.024000000m3
Unit Of Measure ea

Cel-Fi GO Mobile Repeater Kits for Cars, 4WD's & Trucks - DOCUMENTS

Be The First To Review This Product!

Help other MrWiFi users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend



Others Also Bought



More From This Category